"You are the devil's advocate the way you twist my conscience—yet what you say is true. I will help you here so that we can escape."
"Fine. Now get to work. Take Narsisi and have him round up at least three good-sized poles, the kind we were chained to in the pumping gang. Bring them back here along with a couple of shovels."
*
Slaves carried the poles only as far as the outside of the skin walls, since Edipon would not admit them inside, and it was up to Jason and Mikah to drag them laboriously to the site. The D'zertanoj, who never did physical labor, thought it was very funny when Jason suggested that they help. Once in position by the engine, Jason dug channels beneath it and forced the bars under. When this was done he took turns with Mikah in digging out the sand beneath until the engine stood over a pit supported only by the bars. Jason let himself down and examined the bottom of the machine. It was smooth and featureless.
Once more he scratched away the paint with careful precision, until it was cleared around the edges. Here the solid metal gave way to solder and he picked at this until he discovered that a piece of sheet metal had been soldered at the edges and fastened to the bedplate. "Very tricky, these Appsalanoj," he chortled and attacked the solder with a knife blade. When one end was loose he slowly pulled the sheet of metal away, making positive that there was nothing attached to it, nor that it had been booby-trapped in any way. It came off easily enough and clanged down into the pit. The revealed surface was smooth metal, featureless and hard.
"Enough for one day," Jason said, climbing out of the pit and brushing off his hands. It was almost dark. "We've accomplished enough for now and I want to think a bit before I go ahead. So far luck has been on our side, but I don't think it should be this easy. I hope you brought your suitcase with you, Mikah, because you're moving in with me."
"Never! A sink of sin, depravity—"
Jason looked him coldly in the eye and with each word he spoke he stabbed him in the chest with his finger to drive home the point. "You are moving in with me because that is essential to our plans. And if you stop referring to my moral weaknesses I'll stop talking about yours. Now come on."
Living with Mikah Samon was trying, but barely possible. He made Ijale and Jason go to the far wall and turn their backs and promise not to look while he bathed behind a screen of skins. Jason did this but exacted a small revenge by telling Ijale jokes so that they tittered together and Mikah would be sure they were laughing at him. The screen of skins remained after the bath, and was reinforced, and Mikah retired behind it to sleep. Their food still consisted only of krenoj and Jason shuddered while he admitted that he was actually growing used to them.
The following morning, under the frightened gaze of his guards, Jason tackled the underside of the baseplate. He had been thinking about it a good part of the night and he put his theories to the test at once. By pressing hard on a knife he could make a good groove in the metal. It was not as soft as the solder, but seemed to be some simple alloy containing a good percentage of lead. What could it be concealing? Probing carefully with the point of the knife he covered the bottom in a regular pattern. The depth of the metal was uniformly deep except in two spots where he found irregularities, they were on the midline of the rectangular base, and equidistant from the ends and sides. Picking and scraping he uncovered two familiar looking shapes each as big as his head.
"Mikah. Get down in this hole and look at these things. Tell me what you think they are."
Mikah scratched his beard. "They're still covered with this metal, I can't be sure—"
"I'm not asking you to be sure of anything—just tell me what they make you think of."
"Why ... big nuts of course. Threaded on the ends of bolts. But they are so big—"
"They would have to be if they hold the entire metal case on. I think we are getting very close now to the mystery of how to open the engine—and this is the time to be careful. I still can't believe it is as easy as this to crack the secret. I'm going to whittle a wooden template of the nut, then have a wrench made. While I'm gone you stay down here and pick all the metal off the bolt and out of the screw threads. I can put off doing it while we think this thing through, but sooner or later I'm going to have to take a stab at turning one of those nuts. And I find it very hard to forget about that mustard gas."
Making the wrench put a small strain on the local technology and all of the old men who enjoyed the title of Masters of the Still went into consultation over it. One of them was a fair blacksmith and after a ritual sacrifice and a round of prayers he shoved a bar of iron into the charcoal and Jason pumped the bellows until it glowed white hot. With much hammering and cursing it was laboriously formed into a sturdy open-end wrench with an offset head to get at the countersunk nuts. Jason made sure that the opening was slightly undersized, then took the untempered wrench to the work site and filed the jaws to an exact fit. After being reheated and quenched in oil he had the tool that he hoped would do the job.